SPEED-DSL.bis 5.7/11.4
5.7/25.4 Mbit/s SHDSL.bis Modem
Network connection over 2-wire or 4-wire copper lines (up to 25.4 Mbps)
- High-speed network connection over 2-wire or 4-wire copper lines
- Data rates:
- G.SHDSL Standard: 5.7 Mbps or 11.4 Mbps
- With software extension: 12.7 Mbps or 25.4 Mbps
- Interface: 10/100BaseTX
- VLAN transparent
- For 2-wire or 4-wire operation
- Standard: G.SHDSL and G.SHDSL.bis
- For point-to-point and point-to-multipoint connection
- Plug&Play installation
- SNMP, Telnet and HTTP management
Usecases
High-speed Ethernet connection via 2-wire or 4-wire copper lines
The new SPEED-DSL.bis series can flexibly be used for LAN-to-LAN connection at a speed of 11.4Mbps over 4-wire or 5.7 Mbps over 2-wire copper lines by achieving distances up to 7 km. The SPEED-DSL.bis 5.7/11.4 offers a transparent transmission of VLAN “tagged” Ethernet traffic providing by the integrated Layer 2 bridge. The modem can be configured by software settings to operate as a master or slave unit. The slave units automatically synchronizes with the master unit for the best achievable data rate. Unlike other comparable products, the SPEED-DSL. bis 5.7/11.4 supports in one unit both conventional G.SHDSL and the new G.SHDSL.bis standard. The ideal coding can be chosen depending on application, quality and length of a wire. In the event of a copper line loss caused by link problems, the modem continues to operate with second wire without interruption. The modems are available as plug & play stand-alone units to be monitored and configured by console port, Telnet, SNMP and HTTP.
Optional software upgrade:
The software upgrade makes data rates up to 25.4 Mbps possible. With that a distance of 1 km can be coverd. The data rate decreases at longer distances.
Specifications
General
- Operating temperature: -10 to 50°C
- Humidity: 0 to 95% (non-condensing)
- Dimensions (H x W x D): 50 x 220 x 155mm
- Available as stand-alone unit or DIN-rail mounting (48V DC)
- Power supply: 230 V AC (external adapter)
G.SHDS L Line
- Standards:
- ITU-T G.991.2 G.SHDSL
- ITU-T-G.991.2 G.SHDSL.bis
- Coding:
- TC-PAM16 (G.SHDSL)
- TC-PAM32 (G.SHDSL.bis)
- SPEED-DSL.bis 5.7: 2-wire (RJ-45)
- SPEED-DSL.bis 11.4: 4-wire (RJ-45)
Client port
- Standard: IEEE802.3, IEEE802.1Q
- Interface: 1 x 10/100BaseTX (RJ-45)
- Half and full duplex
- VLAN transparent
- MDI/auto-negotiation
Management
- HTTP, web-based management
- Integrated SNMP agent
- Telnet
Software upgrade
- Optional to increase bandwidth from 12.7 or 25.4 Mbps per copper pair
