You are here: Products >> Multiplexer >> PDH Multiplexer >>  SPEED-DUALMUX SFP 2.5  
Suche
Contact
Phone/Fax/Mail:

+49 6103/83483-180
+49 6103/83483-444
send E-Mail E-Mail

Call-Back

SPEED-DUALMUX SFP 2.5 - 10/100 Mbit/s Ethernet Bridge

Ethernet network connections over 2Mbps leased lines

Highlights

  • Data rates: 64kbps up to 2Mbps
  • For framed and unframed
  • VLAN transparent up to 1,536 bytes
  • Interfaces: 2 x 10/100BaseTX (switched)
  • Wire-speed performance
  • Inband and outband management
  • Optional: SNMP
  • Ultimate flexibility: Rack mount card to be used in the 19"-shelf or in a stand-alone housing

Branch connection using "tagged" Ethernet frames over E1 leased lines

The SPEED-BRIDGE G.703 FE1 is the ideal solution to realize LAN-to-LAN connections over digital 2Mbps leased lines. This bridge can be connected both to ITU G.703/G.704 framed (e.g. DTAG D2MS) and ITU G.703 unframed (e.g. DTAG D2MU) links. The SPEED-BRIDGE G.703 FE1 is able to automatically learn MAC addresses of those systems that are connected in the LAN and to forward only those packets whose destination are not located in the local network. The adress table can handle up to 2,048 addresses. The units are perfectly suited  for transparent  VLAN bridging (1,536 bytes). The loop function implemented in the SPEED-BRIDGE G.703 FE1 (remote loop) enables an immediate and easy status monitoring in connection with the LED indicators which means that the system  requires no additional monitoring equipment. This bridge series can operate as a modem over 4-wire copper lines achieving a distance up to 1.7km. The SPEED-BRIDGE G.703 FE1 can be installed in a 1-slot or 3-slot stand-alone housing and can be integrated in the 19"-rack SPEED-SHELF (16-slots). The SPEED-SHELF provides the ability to optionally monitor the SPEED-BRIDGE G.703 FE via SNMP.

Technical Data

General

  • LED status indicators for E1 link, Ethernet activity, link and speed
  • DIP switch for remote loop
  • Remote loop can be managed via Sa6 or data channels
  • Configuration via DIP switchers or NMS
  • Clocking: Internal and remote
  • Dimensions (H x W x D): 28 x 131 x 219 mm
  • Power supply: 230 V AC or 38 - 78 V DC

Line Port

  • Interface: G.703/ G.704 (RJ45)
  • Coding: HDB3
  • Line: 4-wire (120Ω)
  • Framed or unframed according to ITU G.704 (incl. CRC-4)

Ethernet port

  • Interfaces: 2 x 10/100BaseTX (switched)
  • Connector: RJ45 jack
  • Standard: IEEE 802.3 and 802.3u
  • Table of addresses: 2,048 MAC addresses
  • Buffer: For 48kbytes
  • Maximum fram lenghts: 1,536 bytes

Point-to-Point operation

  • Distance: 1.7 km
  • Attenuation: 36db
  • Line: 4-wire

Management

  • Settings via DIP switches
  • Integrated RS232 console port (inband  management via Sa6 or TS31)
  • Configuration and monitoring management optionally provided using the SNMP agent in the 19"-shelf (optional redundant AC and DC power supplies)

Approval

  • CE mark
  • ETSI TBR 13
Weitere Produkte
SPEED-MUX FE1
E1 Access Multiplexer