You are here: Products >> Multiplexer >> PDH Multiplexer >>  SPEED-MUX FE1  
Suche
 
Contact
Phone/Fax/Mail:

+49 6103/83483-180
+49 6103/83483-444
send E-Mail E-Mail

Call-Back
 

SPEED-MUX FE1 - E1 Access Multiplexer

Transmission of voice and data using an E1 leased line

Highlights

SPEED-MUX FE1
 zoom 
  • Aggregation of serial interfaces and Ethernet over E1 leased lines
  • Data rate: Up to 1.984Mbps
  • Interfaces: X.21, V.35, G.703/G.704, ISDN and 10/100BaseTX
  • Line: G.703/G.704 (E1)
  • For framed and unframed 1.984Mbps connections
  • Modular design
  • Up to two multiplexer can be installed in a 19” rack

E1 voice-and-data integration in a point-to-point operation

Multiple services for voice and data applications can simultaneously be transmitted over a framed or unframed E1 line (e.g. D2MU, D2MS) by the TDM technology of the SPEED-MUX FE1. Thus costs for further leased lines can be saved.
The SPEED-MUX FE1 supports numerous interfaces like 10/100BaseTX, ISDN BRI S0, X.21, G.703/G.704 and V.35 to be multiplexed on a E1 leased line. Data are transparently transferred for maintaining system-dependent features of a PBX during voice transmission. The 4-slot 19” rack housing is modular designed for integration of one E1 link module (supporting additionally an X.21 or 10/100BaseTX client interface) and up to three interface modules.

E1 voice-and-data integration in a point-to-point operation
 zoom 

Pre-concentration of low-speed leased lines for saving expensive router ports

A pre-concentration enables a transmission of multiple X.21 or ISDN BRI S0 lines over an E1 link supporting a maximum speed of 1.984Mbps for saving expensive links to each individual access router.

The SPEED-MUX FE1 is ideally suited for both Enterprise networks and Carrier access solutions. The product can be combined with other SPEED products to be installed in the 4-slot SPEED-RACKHOUSING. The SPEED-MUX FE1 can be connected to existing NMS infrastructures by using a SNMP management module.

Pre-concentration of low-speed leased lines for saving expensive router ports
 zoom 

Technical Data

General

  • Power supply:
    • AC: 230 V
    • DC: 36 – 72 V
    • Redundant (each combination available):
    • 2 x AC, 2 x DC or AC/DC
  • 4-slot 19” housing for integration of up to two multiplexer
  • Up to four line or interface modules

Line port

  • LM-FE1 module (3U rack mount):
  • Link interface: G.703/G.704 (120Ohm/4-wire), RJ45
  • Data rate: Up to 1.984Mbps
  • Synchronous bit rates: n x 64kbps (n = 0…31)
  • DIP switch for remote loop (loop function can be disabled)
  • Optional: Framed connection incl. CRC-4

Housing types

  • 4-slot SPEED-RACKHOUSING

Client port

  • IM-S4 module (3U rack mount):
    • Interface: 4 x ISDN BRI S0 per module (100Ohm), RJ45
  • IM-FE1 module (3U rack mount):
    • Interface: 1 x G.703/G.704 (120Ohm), RJ45
    • Synchronous bit rates: n x 64kbps (n = 1….31)
  • IM-X2 module (3U rack mount):
    • Data rate: 512kbps, X.21
    • Optional: V.35 using external adapter
  • Selectable client interface integrated on a line module:
    • X.21/V.11 with DB15 connector or
    • 2 x 10/100BaseTX (switched)

Management

  • Settings via DIP switches
  • Configuration and monitoring management provided by using a SNMP management module:
    • Access via RS232
    • Access via Telnet
Weitere Infos