You are here: Products >> Product family >> E1 solutions >>  SPEED-MUX DSL  
Call Back!
SPEED-MUX DSL
More information to this product
 
Suche
 
CWDM
 
Highlights
Competitive pluggables
 

Mister WongoneviewFolkdask.comdel.icio.usdigg.comLinkaARENAMyLink.deTechnoratiWebnewsYiggItgoogle.com

Modular 5.3Mbps SHDSL multiplexer

High bit rate connection of voice, data and video applications using 2-wire copper lines

SPEED-MUX DSL

Highlights

  • Symmetric data rate up to 5.3 Mbps
  • G.SHDSL or G.SHDSL
  • Interfaces: n x 64lkbps, ISDN BRI S0, G.703/G.704, 10/100BAseTX
  • Automatic master/slave configuration
  • Doubler increases achievable distance
  • Synchronization time <1min.
  • Inband management (remote CLI)
  • Optional: SNMP management

Description

The SPEED-MUX DSL belongs to the next generation of high-speed G.SHDSL multiplexers with a maximum bandwidth of 5.3Mbps over 2-wire copper lines. The multiplexer is equipped with an integrated 10/100BaseTX, serial n x 64kbps or G.703/G.704 enduser interface with the ability to connect further interfaces like  4 x ISDN BRI S0, 2 x X.21/V.35 and 1 x G.703 (E1)  modules using the internal 2Mbps bus of the 3-slot stand-alone housing or the SPEED-SHELF.
The optional support of the new G.SHDSL standard enables 25% greater distances so that transmission over distances of more than 1 km can be achieved. Links up to 50 km (with 2Mbps) can be realized by the use of doublers. An enhancement to provide automatic synchronization without previous configuration is available which enable implementations even by untrained personnel. The multiplexer then adapts to the optimum data rate independently.
The SPEED-MUX DSL can be installed flexibly in a 1-slot or 3-slot stand-alone housing and can be integrated in the 19"-rack SPEED SHELF (16 slots). The SPEED-SHELF provides the ability to optionally monitor the SPEED-MODEM FO via SNMP using a management rack mount card.

PDF download

SPEED-MUX_DSLe.pdf

Example of use

High bit rate enterprise and branch networking using copper lines

SPEED-MUX DSL - Applikation

PBX and LAN connection using 2-wire copper lines

SPEED-MUX DSL - Applikation

Table of distance

SPEED-MUX DSL - Applikation

Mister WongoneviewFolkdask.comdel.icio.usdigg.comLinkaARENAMyLink.deTechnoratiWebnewsYiggItgoogle.com
Price
Get price!
Get price for product
-
 
technical data


General

  • LED indicators: Sys, DSL, E1, ETH, X.21
  • Clocking: Internal, remote, external E1, external 2Mbps bus
  • Loops: Internal, external
  • Dimensions (H x W x D): 28 x 131 x 219 mm


Line port

  • Standard: G.SHDSL.bis or G.SHDSL with TC-PAM coding
  • Data rate (2-wire): 72kbps to 2.3 / 5.3Mbps
  • Connector: RJ45
  • Protection against lightning up to 5 kV


Interface port

  • Integrated interfaces on the DSL module:
    -10/100BaseTX (RJ45) bridge (auto)
    -n x 64kbps (DCE) for X.21 (DB15= ord V.35 (external Wincheser or DB25 adapter)
    -G.703/G.704 (RJ45) framed or unframed E
  • Further interface modules available using the internal 2Mbps bus:
    -2 x X.21 (n x 64kbps), DCE/DTE or V.35 (external Winchester ore DB25 adapter)
    -1 x G.703/G.704 (RJ45) E1/T1
    -4 x ISDN BRI S0
  • Ethernet specifications:
    -Manual or automatic speed setting
    -VLAN transparent
    -MAC addresses: 1,024, dynamic table
  • Dynamic bandwith allocation in n x 64kbps steps


Doubler specifications

  • Interfaces: 2 x SHDSL (RJ45)
  • Line or locally powered
  • Distance:
    -Up to 50 km with 2Mbps


Housing options

  • 1-slot stand-alone housing
  • 3-slot stand-alone housing
  • 16-slot 19"SPEED-SHELF (optional redundant AC and DC power supplies)


Management

  • Integrated RS232 console port (RJ45)
  • OPtional: SNMP an Telnet using an NMS rack mount card for configuration and trouble-shooting management
  • Diagnosis: Loops
  • Inband management with remote CLI