Management Cards

Central Management with SPEED-NMS card

Central Management with GUI and Elementmanager

The SPEED-NMS management card is the central access point of the SPEED-OTS-5000 series. The monitoring and configuration of the system can be performed via a Graphical User Interface, SNMP or per Command Line Interface. 

  • Central access to all configurations of the SPEED-OTS-5000 series 
  • SNMP v1, v2c or v3 management for monitoring and configuration 
  • Configurable event log and sys log
  • User-friendly and intuitive web interface (HTTP / HTTPS) via internet browser
  • Access Control List and TLS 1.2
  • Provision of network topology data via SNMP
  • RADUIS user authentication
  • SSHv2 incl. SCP or Telnet access
  • Port based alarm locking (with timed alarm activation)
  • Central config backup and software update of all slots via NMS management card
  • Automatic configuration update after module deployment
  • Remote in-band NMS via WDM uplink
  • NMS connectable from 3rd party network equipment remaining Ethernet ports

Configure DWDM path

Contact Person
Christian Baumeister
Director International Sales
+49 6103 834 83 333

Deployment Scenarios

Element Management System (EMS)

Powerful Element Management System for SPEED-OTS-5000

SPEED-CONTROL EMS is a browser-based element management system that is optimized for the SPEED-OTS-5000. It is a parental instance, where the environmental parameter of the integrated systems are centrally displayed and monitored.

The SPEED-CONTROL EMS Server will be provisioned as a virtual machine. The delivered virtual machine can be imported and launched from a virtualization host system.

 

  • Monitoring of environmental parameter and system status, e.g. temperature, encryption status, transceiver levels (Client & Line), chassis alarms, power consumption
  • Alarm with pre-configured and individually customizable regulations via traps, Syslog as well as automatically or manually defined threshold values and alarm forwarding via e-mail or SMS
  • Automatic inventory of carriers and their components
  • Topology showing the locations and existing connections of a route on the Geographical Map
  • Displaying the optical connections of a distance and damping per connection on the Network Map
  • Central Software Update for Line and Management Cards
  • Central automated configuration backup and the possibility of backup to the system cards
  • Display of the quality of the cable with transmission level, receiving level and damping
  • IPv6 support
  • Central Authentication via RADIUS
  • Configurable Dashboards per User

 

Muxponder Cards

Multiplexer Cards for the Aggregation of different Channels to 100 Gbps, 200 Gbps and 400 Gbps

Multiplexer Cards for Aggregation up to 100 Gbps, 200 Gbps or 400 Gpbs

The SPEED-MUX Muxponder Cards enable a direct aggregation of 1/10/40/100/200/400 Gigabit Ethernet, 4/8/16/32 Gigabit Fiber Channel, 5/10/14/25G InfiniBand and OTU-2,-3,-4 to 100 Gbps, 200 Gbps and 400 Gbps and thus offers the user the maximum flexibility for relevant applications.

The pluggable CFP and CFP2 line transceivers transmit 100 Gbps, 200 Gbps and 400 Gbps services via one DWDM channel. Therefore up to 64/96 DWDM channels can be realized for a transmission of up to 25.6 Tbps over only one optical fiber.

With the integrated AES 256 Bit Layer 1 encryption method, a hardware-based encryption with lowest latency and full data throughput is used. This enables a data transfer according to the highest security standards. Encryption is an option and can be activated via special additional license. The activation of the encryption can also be done retrospectively by a software update without replacing the existing system components.

The flagship SPEED-MUX 800G Muxponder Card can also be used as a dual 400G transponder card. This ensures investment protection for the user as part of future network expansions.

Configure DWDM path

Transponder Cards

Converter cards from 100 Mbps up to 400 Gbps

Transponder Cards 100 Mbps - 400 Gbps

The SPEED transponder cards are compact 2, 4 or 6 channel transponder cards. Depending on the customer application and transponder card type, pluggable client interfaces are available for SFP, QSFP+, QSFP28 and QSFP-DD transceivers.

In CWDM and DWDM networks, they convert up to 2/4/6 channels to relevant CWDM and DWDM wavelengths. The multi rate feature supports almost all protocols:

  • 100BaseTX / FX and 1000BaseTX / FX
  • 10/25/100/200/400 Gigabit Ethernet
  • OTU-2,-3,-4
  • STM-1/4/16/64
  • HD-SDI, 3G-SDI DVB-ASI
  • Audio: MADI protocol
  • 1/2/4/8/10/16/32 Gigabit Fiber Channel
  • 5/10/14/25 Gbps InfiniBand

Additionally the SPEED Transponder Cards with integrated 3R (Reshaping, Re-amplification, Retiming) and FEC (Forward Error Correction) function enable error-free transmission over longer distances. The integrated SNMP agent can send SNMP traps to a management system via Ethernet.

Configure DWDM path

Optical Amplifiers

EDFA Modules for the transmission via longer distances

EDFA Amplifier for long Distances

The use of amplifiers can increase the range of the optical transmission system. Depending on the distance to be overcome and existing intermediate locations, three amplifier variants (booster, inline, and pre-amp amplifiers) are available. All SPEED-OTS-5000 amplifier modules amplify up to 64 or 96 DWDM channels in the optical C-band on a fiber pair.

The protocol transparent amplification is independent of the application to be transmitted. The amplifiers can be monitored and configured locally via the Comand Line Interface (CLI), Telnet and WEB-interface or also remotely via the SPEED-NMS Management Card by using the SNMP standard and supported by the user friendly graphical user interface (GUI). An optional remote management via an in-band OSC channel is also available. All optical amplifiers meet the requirements of Laser Class 1M, so no laser safety officer is necessary.

Configure DWDM path

Management Cards

Central Management with SPEED-NMS card

Central Management with GUI and Elementmanager

The SPEED-NMS management card is the central access point of the SPEED-OTS-5000 series. The monitoring and configuration of the system can be performed via a Graphical User Interface, SNMP or per Command Line Interface. 

  • Central access to all configurations of the SPEED-OTS-5000 series 
  • SNMP v1, v2c or v3 management for monitoring and configuration 
  • Configurable event log and sys log
  • User-friendly and intuitive web interface (HTTP / HTTPS) via internet browser
  • Access Control List and TLS 1.2
  • Provision of network topology data via SNMP
  • RADUIS user authentication
  • SSHv2 incl. SCP or Telnet access
  • Port based alarm locking (with timed alarm activation)
  • Central config backup and software update of all slots via NMS management card
  • Automatic configuration update after module deployment
  • Remote in-band NMS via WDM uplink
  • NMS connectable from 3rd party network equipment remaining Ethernet ports

Configure DWDM path

Chassis

1U and 5U modular rack system

Active and passive 1 or 5 RU modular rack system

The modular rack system with 1 or 5 units (U) SPEED-CARRIER 5U-H and SPEED-CARRIER 1U-H (High Power) can be flexibly equipped with active and passive system cards according to customer requirements. All modules can be put into operation via the front side, are hot-swappable and exchangeable without affecting the remaining data traffic. The rack systems can be used to operate system cards with high bandwidths of up to 400 Gbit/s and AES 256 Layer 1 encryption. This makes the system ideal for DCI applications. The highlight of the 1U variant is its high packing density of up to 3,200 Gbit/s per U.

In both rack systems, an intelligent fan concept means that no ventilation distance to neighboring systems is required. Thus, up to 19 (or 9) slots can be equipped with high and low bit rate system cards as well as an NMS card. Due to the low installation depth and a flexible redundant power supply of 230 V AC or 48 V DC, the system can be used everywhere.

Configure DWDM path

Passive WDM Multiplexer

WDM & CWDM & DWDM & BWDM & ADM Multiplexer as well as DCM and SPLIT Modules

The SPEED-WDM Series includes a variety of passive CWDM and DWDM modules with different numbers of channels. The SPEED-CWDM Series is available in 5, 8, 9 and 16 CWDM wavelengths per system card. The CWDM five and nine wavelengths multiplexers have a cascading port that allows them to be extended by another eight CWDM wavelengths without interruption of the running operation.

Through the use of DWDM modules, up to 64 or 96 DWDM channels can be transmitted over one fiber optic. For each channel, e.g. 400 Gbps application are switched - thus results in a total data rate of 25.6 Tbps per pair fiber optic.

With the help of our cascading concept it is possible to cascade 8 to 40 DWDM channels without interrupting already running services.

With DWDM band filters, DWDM bands with 8 DWDM channels each can be interconnected with lowest signal loss at intermediate locations.

The SPEED-Add&Drop multiplexers are available for CWDM or DWDM applications. Using Add&Drop multiplexers, it is possible to couple and decouple one or more wavelengths in a fiber in a dedicated manner without having to use a CWDM or DWDM multiplexer to extract all wavelengths.

Depending on customer requirements, we manufacture individual CWDM / DWDM modules with different wavelengths, connectors and port numbers for different housing types.

The dispersion compensation module SPEED-DCM compensates the propagation time differences of the different DWDM wavelengths in optical transmission systems. It is a purely passive device which can be equipped along the link for ranges from 20 km to 200 km, depending on the requirements. The dispersion compensation is totally protocol transparent.

The SPEED-SPLIT series enables live monitoring of all wavelengths via an external OSA (Optical Spectrum Analyzer) meter. For this, e.g. SPEED-SPLIT 97/03 provides 3% of the optical power and provides it for the analysis.

Configure DWDM path

Fiber Monitoring

24/7 Fiber monitoring and fault detection

The SPEED-FIBER MONITORING is your solution for efficient fiber monitoring! Our scalable plug-and-play technology revolutionizes the monitoring of fiber optic networks and offers you unique benefits.

SPEED-FIBER MONITORING is designed to centrally monitor up to 48 fibers, easily and without complex installations. This scalability allows for comprehensive 24/7 fiber monitoring during operation. In the event of an incident, our solution enables precise localization of the fault, minimizing downtime.

Our monitoring technology utilizes OTDR measurements in the WDM network to ensure precise and reliable monitoring. Automatic fault detection and alerting seamlessly occur via SNMP or email, keeping you promptly informed of disturbances. Furthermore, detailed reports can be sent to a central management system to ensure transparent and efficient administration.

With SPEED-FIBER MONITORING, you can not only detect failures in real-time but also proactively respond to them. Trust in our advanced technology to keep your fiber optic network performing at its peak.

Why hesitate? Experience a worry-free future of fiber monitoring with SPEED-FIBER MONITORING!

The live fiber monitoring solution enables:

  • 24/7 live monitoring - ensuring flawless services during installation, activation, and beyond
  • Detection of performance disruptions on the fiber optic before service impairment, enabling proactive avoidance of service interruptions
  • Faster fault resolution by localizing faults on the fiber optic in minutes instead of hours
  • Reduction of operating costs by avoiding unnecessary service trips
  • Protection of investment by monitoring the long-term behavior of installed fibers
  • Reduction of installation costs through faster execution of the testing process and comprehensive support for technicians
  • Protection of network integrity and security by detecting and localizing unauthorized access to the fiber optic

Configure DWDM path

Optical Protection Switch

Optical Protection Switch with 1+1 Protection

1 + 1 Protection without single Point of Failure for maximum availability thanks to the double protection system

By use SPEED-OPTICAL PATH PROTECTION optical xWDM circuits you can improve the availability of xWDM circuits. The failover switching is performed on the optical layer within 50ms from the main path to the recovery link.

This failure protection can even be further extended by special double protection function feature , which ensure 100% availability in case of simultaneous failure of one of the main routers, WDM and 1+1 protection systems. This double-protection circuit avoids a single-point-of-failure and increases the availability of the entire system to a maximum.

Configure DWDM path

References

Certifications